Featured

How to Install Home Assistant on Windows with Hyper-V

on
Works on Windows 10/11 Pro or Enterprise. 1. Enable Hyper-V Press Windows Key + S , type Windows Features , and click Turn Windows features on or off . Tick Hyper-V , Hyper-V Management Tools , and Hyper-V Platform . Click OK , reboot your computer. 2. Download the Home Assistant VHDX Go to: Home Assistant – Windows Installation Download the VHDX (Hyper-V) image. Extract it to a folder you can easily find (e.g., C:\VMs\HomeAssistant ). 3. Create the Virtual Machine Press Windows Key , search for Hyper-V Manager , and open it. On the right-hand menu, click Quick Create . Select Local installation source → choose any existing image for now (we’ll replace it later). Give the VM a name, click Create Virtual Machine . 4. Swap in the Home Assistant VHDX In Hyper-V Manager , right-click your new VM → Settings . Under SCSI Controller → Hard Drive , click Browse . Select the HomeAssistant.vhdx file you downloaded. Click Apply and OK . 5. Start ...
0

Root Exynos S10

on
tested on Exynos beyond1lte

Download Latest Magisk manager here




1. Use 7zip to extract the firmware zip downloaded from frija

2. Connect device to PC and copy the AP file to internal storage

3. Now we need to patch the AP file with magisk manager. Install the APK and go to install and select 'select and patch a file'


4. Copy the patched file to your PC with adb pull /sdcard/Download/magisk_patched.tar.

UNLOCK BOOTLOADER 


5. Reboot to download mode, and flash magisk_patched.tar as AP in odin together with the BL, CP and CSC files

WIPE DATA/FACTORY RESET

Press Power + Volume Down to exit download mode. As soon as the screen turns off, immediately press the combo key to boot to recovery (e.g. on the S10 it is Power + Bixby + Volume Up). Since we want to boot into stock recovery, continue pressing the volume up button until you see the stock recovery screen

Use volume buttons to navigate through the stock recovery menu, and the power button to select an option. Choose Wipe data/factory reset to wipe the data of the device

Reboot system now, and immediately press the combo key to recovery. After seeing the bootloader warning screen, release all buttons so it can boot to the system

After the device is booted up, do the usual initial setup. needs an internet connection

Manually install the magisk app

Magisk manager will ask to do additional setups. Let it do its job and the app will automatically reboot the phone







Comments

Post a Comment