Featured

How to Install Home Assistant on Windows with Hyper-V

on
Works on Windows 10/11 Pro or Enterprise. 1. Enable Hyper-V Press Windows Key + S , type Windows Features , and click Turn Windows features on or off . Tick Hyper-V , Hyper-V Management Tools , and Hyper-V Platform . Click OK , reboot your computer. 2. Download the Home Assistant VHDX Go to: Home Assistant – Windows Installation Download the VHDX (Hyper-V) image. Extract it to a folder you can easily find (e.g., C:\VMs\HomeAssistant ). 3. Create the Virtual Machine Press Windows Key , search for Hyper-V Manager , and open it. On the right-hand menu, click Quick Create . Select Local installation source → choose any existing image for now (we’ll replace it later). Give the VM a name, click Create Virtual Machine . 4. Swap in the Home Assistant VHDX In Hyper-V Manager , right-click your new VM → Settings . Under SCSI Controller → Hard Drive , click Browse . Select the HomeAssistant.vhdx file you downloaded. Click Apply and OK . 5. Start ...
0

Guide: How to Unlock the Bootloader on Samsung One UI 5

on
Disclaimer: Unlocking the bootloader may lead to data loss, security risks, and void the warranty. Proceed at your own risk and ensure you understand the consequences before attempting the procedure.



Backup Your Data

Before initiating the process, back up all your important data, including contacts, photos, videos, and files. Unlocking the bootloader will wipe your device, so ensure you have a copy of your data stored safely.

Charge Your Device

Make sure your Samsung device has sufficient battery life or connect it to a power source during the process to prevent any interruptions.

Enable USB debugging

Go to Settings > About Phone > Software Information. Tap on the "Build Number" seven times to enable Developer Options. Then, navigate to Developer Options and enable USB Debugging.




Install ADB and Fastboot Drivers

- Download the Android SDK Platform Tools (ADB and Fastboot) and the Samsung USB driver on your computer.

- Extract the platform tools zip file to a folder on your PC and install the USB driver 
- Open the command prompt or terminal window on your computer in the platform tools folder. 


Enable OEM Unlocking

- Go to Settings > Developer Options.
- Scroll down and find "OEM unlocking."
- Toggle the switch to enable it.
- Confirm your screen lock password or PIN if prompted.

Reboot to Download Mode


Method 1:

If you don't reboot using the power menu, hold power and tell bixby "reboot to download mode" bixby will say "are you sure?" reply with "yes" 


Method 2: 

Open a command prompt

cd "path to the platform tools folder"

adb reboot download 


Hold volume up and volume down at the same time and plug the phone into your PC

Long press volume up to unlock the bootloader




- A warning message will appear on your device.
- Use the volume keys to navigate to "Yes" and confirm the bootloader unlocking by pressing the power button.
- Wait for the process to complete. Your device will be wiped during this step 

When the phone reboots, connect your phone to wifi and enable developer options to bypass the vaultkeeper service

The OEM unlock button should be greyed out

Comments

Post a Comment